Blog

Nov 22, 2023

KHS’ automated line changeovers for the InnoPET TriBlock

Flexibility and efficiency on show at Drinkte in Munich On day two of the

Flexibility and efficiency on show at Drinkte in Munich

On day two of the Drinktec trade show in Munich in Hall B4, KHS continues to show how its automated processes boost efficiency and reduce both the amount of operator intervention and the number of associated errors. The new, automated KHS InnoPET iflex line changeovers cut conversion times for an entire non-returnable PET line down to just 30 minutes.

With the number of SKUs constantly on the increase, this feature considerably boosts beverage producers’ degree of flexibility. The new stretch blow molder/labeler/filler block with its automated format changeovers illustrates how this can be combined with efficiency. With it, operators save precious time.

The example of KHS’ InnoPET TriBlock stretch blow molder/labeler/filler block illustrates how automated format changeovers can be successfully implemented. And it shows that beverage producers can combine maximum flexibility with high efficiency.

PET lines today are very rarely configured exclusively from individual machines. Instead, beverage producers want a turnkey system with a small footprint, shorter conveying segments, reduced maintenance effort, and – first and foremost – short changeover times. As part of the holistic, automated line changeovers on its PET lines, the InnoPET stretch blow molder, labeler and filler TriBlock satisfy these high demands. Thanks to the new KHS InnoPET iflex automation concept, beverage bottlers can now save up to 70% of the time needed for manual changeovers. To this end, various functions were developed for the different segments on the InnoPET TriBlock that considerably increase the level of automation and make manual intervention largely superfluous with a few clicks on the HMI.

PET bottles are produced in the stretch blow molding module. When formats are scheduled for a changeover, the iflex first triggers the automatic loading of recipes for the heating profile, blow pressure, preform conveying and inspection technology.

This machine's most important new feature is the mold changeover when the new batch requires a different bottle size or shape. Here, the switch is made with the help of a robot that changes the two side mold shells and base mold fully automatically and very quickly during ongoing production. It removes the previous molds from the stations, places them in the mold set magazine, takes out the new molds and slots them back into the stations without any need for action from the operator. For this short, fully reproducible procedure, the robot needs just 41 seconds per station. The time for manual intervention is thus reduced from a previous 95 to just eight minutes. This is further facilitated by automatic bottle base detection adjustment at the blow wheel transfer star with the help of several sensors. All the operator has to do by hand is to start the format changeover and later start the new production run.

The time and effort needed for manual work by the operator are also reduced in the labeling module. This is chiefly thanks to the automatic adaptation of the label gluing height and bottle diameter. However, the operator still carries out the toolless changeover of the vacuum drum, brushes and bottle guide parts. Nevertheless, two labeling stations can now be converted within 20 minutes.

In the filler, module conversion is fully automatic. Firstly, this avoids handling errors by the operator, and secondly, it prevents the risk of bacterial or microbiological contamination by people entering the hygiene area that would then need foam cleaning. This would delay the changeover by around 30 minutes.

The key components relevant to automatic changeovers are the guides from the filler infeed to the capper discharge that need to be set to the bottle diameter and height. Conical base guides or bottle pockets are used here, for example, where the containers are fixed by simple height adjustment as in a funnel. The discharge conveyor is vertically adjusted by a servomotor instead of being manually cranked; the same goes for the horizontal adjustment of the railings. What's more, the bottle caps are also changed over automatically, such as when a new beverage features a different cap color from the previous one.

We can see just how important the new iflex options are on the KHS InnoPET TriBlock in particular when it comes to highly flexible beverage filling if we take a look at the total time saving: depending on the specific changeover routine on-site, this amounts to approximately 95 minutes. The remaining manual tasks only take eight minutes on the stretch blow molding module and 20 minutes on the labeling module. On the filling module, format changeovers have been fully automated and are completed without intervention in a matter of seconds. All told, changeovers are now implemented in less than a third of the time previously required, allowing beverage producers to look forward to a high degree of flexibility and efficiency.

The Innoline Flex Control line management system is essential if the iflex is to function properly and its potential be fully exploited. It takes over the tasks of line and order management from the beverage producer's ERP system and orchestrates the automatic changeover of the machines. The basic idea is to help the operator always do exactly the right thing.

Integrating the Innoline Flex Control web GUI into the HMI displays data on the machine operator panel. The operator sees which processing program must be selected when and which materials are needed where to produce the respective current version of the order sequence that has been tactically planned by the system. With the automated iflex variant, this is triggered by the simple press of a button. On the guided iflex version, the system clearly prompts the operator through the various steps and provides straightforward instructions for all action that needs to be taken manually.

The impact, resilience, and growth of responsible packaging in a wide region are daily chronicled by Packaging South Asia.

A multi-channel B2B publication and digital platform such as Packaging South Asia is always aware of the prospect of new beginnings and renewal. Its 16-year-old print monthly, based in New Delhi, India hasdemonstrated its commitment to progress and growth. The Indian and Asian packaging industries have shown resilience in the face of ongoing challenges over the past three years.

As we present our publishing plan for 2023, India's real GDP growth for the financial year ending 31 March 2023 will reach 6.3%. Packaging industry growth has exceeded GDP growth even when allowing for inflation in the past three years.

The capacity for flexible film manufacturing in India increased by 33% over the past three years. With orders in place, we expect another 33% capacity addition from 2023 to 2025. Capacities in monocartons, corrugation, aseptic liquid packaging, and labels have grown similarly. The numbers are positive for most of the economies in the region – our platform increasingly reaches and influences these.

Even given the disruptions of supply chains, raw material prices, and the challenge of responsible and sustainable packaging, packaging in all its creative forms and purposes has significant headroom to grow in India and Asia. Our context and coverage engulf the entire packaging supply chain – from concept to shelf and further – to waste collection and recycling. We target brand owners, product managers, raw material suppliers, packaging designers and converters, and recyclers.

In an admittedly fragmented and textured terrain, this is the right time to plan your participation and marketing support communication – in our impactful and highly targeted business platform. Tell us whatyou need. Speak and write to our editorial and advertising teams!For advertisement [email protected] , for editorial [email protected] and for subscriptions [email protected]

– Naresh Khanna

Subscribe to our Newsletter

Check your inbox or spam folder to confirm your subscription.

What lies in store for the packaging industry in India and South Asia this coming year? Inflation, disruption of supply chains or environmental regulation? Or the resumption of high rural demand, continued investment and industry consolidation? Whatever happens, Packaging South Asia will be there, providing clarity and independent technical and business information in India and South Asia and around the world. We are a compact Indian organization bringing a window of fair and rigorous technical and business information that the industry can access this year and beyond. Please support us with your advertising and subscriptions, to keep us going and growing.

Thank you.

Check your inbox or spam folder to confirm your subscription.